Antique Oak Dining Table 19th C and 14 chairs


  • Set of 15
  • £44,000.00
  • €51,520 Euro
  • $60,680 US Dollar

United Kingdom

DC Member since 2021
Contact dealer Delivery quote Similar item? Stock request

  • Description
  • Location
  • About dealer

Antique Oak Dining Table 19th C and 14 chairs

There is no mistaking the style and sophisticated design of this dining set comprising an exquisite rare English antique Elizabethan Revival pollard oak extending dining table, circa 1850 in date and a set of fourteen vintage dining chairs.

The table with a striking rectangular pollard oak top with canted corners, inlaid marquetry decoration to match the fret carved frieze, and a moulded edge over the already mentioned beautiful hand carved frieze.

This majestic table has four leaf extensions and can comfortably seat fourteen. This striking table has been hand-crafted from solid oak which is not only strong, but has a beautiful grain. The top is in Pollard, oak with twin line inlaid marquetry decoration, which is seen in the intricate burr on the table top.

The four leaf extensions can be added or removed as required to suit the occassion by a special winding mechanism.

The table is raised on massive hand carved square section legs with blind fret moulding, headed by carved masks, and terminating in brass castors.

The superb set of fourteen Vintage burr walnut and inlaid marquetry dining chairs complement the table beautifully. The set comprises a pair of armchairs along with a total of twelve side chairs. The chairs are made from solid walnut and also feature marquetry inlaid decoration along the same lines as the table.

For your seating comfort, the chairs in this set have beautifully reupholstered and feature drop in seats which can quickly and easily be removed leaving the cane seats below available to provide a cooler seating option in warmer weather.

This impressive dining set is exemplary of the early Victorian era with its Pollard oak and delicate inlaid marquetry. It will stand out in your dining or conference room and will become the key piece in your furnishing collection.

In excellent condition having been beautifully cleaned, French polished and waxed in our workshops, please see photos for confirmation.

Dimensions in cm:
Height 77 x Width 360 x Depth 142 - Fully Extended
Height 77 x Width 160 x Depth 142 - With all leaves removed
Height 105 x Width 48 x Depth 46 - Chair
Height 105 x Width 56 x Depth 53 - Armchairs
Height 53 - Seat Height

Dimensions in inches:
Height 2 foot, 6 inches x Width 11 foot, 10 inches x Depth 4 foot, 8 inches - Fully Extended
Height 2 foot, 6 inches x Width 5 foot, 3 inches x Depth 4 foot, 8 inches - With all leaves removed
Height 3 foot, 5 inches x Width 1 foot, 7 inches x Depth 1 foot, 6 inches - Chair
Height 3 foot, 5 inches x Width 1 foot, 10 inches x Depth 1 foot, 9 inches - Armchairs
Height 1 foot, 9 inches - Seat Height

Pollard Oak
Pollarding is a pruning system in which the upper branches of a tree are removed, promoting a dense head of foliage and branches. It has been common in Europe since medieval times and is practised today in urban areas worldwide, primarily to maintain trees at a predetermined height. The bole of the tree, constantly cut back over a period of years, will eventually form a lump, or ‘burr’, which when sawn for veneer, gives a lovely grained, swirling figure.
The effect is similar to that of burr walnut with its distinctive speckled grain. Burrs, or ‘burls’, are growths which appear on the side of tree trunks, resulting from a tree undergoing some form of stress. They may be caused by an injury, virus or fungus.
During the 19th century great strides were made in the mechanisation of cabinet making. Marc Isambard Brunel [ Isambard Kingdom’s father] built the first steam driven saw mill, and invented a circular saw that could be used to cut veneers thinly and evenly for the first time. He also developed the first hydraulic veneer press. The figured wood cut from burrs and pollards is notoriously difficult to cut and lay: the wild grain which makes it so attractive results in a very delicate, brittle veneer. The new machines enabled the Victorian craftsmen to make the most of these beautiful timbers.

Winding Mechanism for extending tables
Were first made in the early 19th Century.
A man by the name of Samuel Hawkins applied for a patent on a screw expander on June 6th, 1861. Presumably, Mr. Hawkins either died or retired because his business was taken over by a young machinist named Joseph Fitter in 1864.
Joseph Fitter operated a machinist shop where he produced winding mechanisms for extending tables as well as screw expanders for piano stools and other applications at 210 Cheapside, Birmingham England by the name of Britannia Works.

Our reference: 09642a


  • H: 77cm (30.31in)
  • W: 360cm (141.73in)
  • D: 142cm (55.91in)


circa 1850

Contact Us


Telephone: +44 (0) 20 8809 9605



Manor Warehouse
318 Green Lanes
N4 1BX
United Kingdom


SOCIAL MEDIA:  Facebook, Instagram, YouTube, TwitterPinterest

We are one of the UK's premier furniture dealers and have been trading in London for three decades.

We specialise in English and Continental furniture, silver, porcelain and decorative items, both antique and contemporary.

Opening hours:

Our London showrooms are open Monday to Friday 10am to 5pm. We are open Saturdays by appointment.

We use cookies to help make this website better. Find out more about cookies.